·加入收藏 ·设为首页
综合首页 公司简介 企业文化 资质荣誉 产品展示 新闻动态 客户留言 联系我们 销售网络 电子地图
   
  除雪设备
  ·除雪车系列
·其他种类除雪设备
·除雪铲系列
·特种除雪设备
  环卫设备
  ·凯雷垃圾处理压缩转运系统方案
·垃圾压缩站
·凯雷移动式联体垃圾压缩系统
·垃圾转运集装箱
·车厢可卸式垃圾车
·护栏清洗机
·环卫设施系列
·高压洒水灌
·绿篱修剪机
  绿篱修剪机
好来屋牛排加盟 尚泉洗涤设备 酸奶吧 胜益电动老爷车 孚森NSK轴承 华宇真空镀膜设备 雷松光电液晶广告机 华德莱滤布 浙江舟山大宗 中原双齿辊破碎机 华鲁磁力搅拌器 北服人画室 陈平杭州刑事律师 颜悦吊牌 东轻铝板价格 顺仪压缩空气流量计
 
您当前的位置:综合首页 - 产品展示 - 环卫设备 - 绿篱修剪机 -
绿篱修剪机

绿篱修剪机  加入时间:2012-12-22 13:35:32     点击:1528

1.本实用新型涉及一种绿化修建剪机,是一种多功能高速公路绿化修剪机。
2.技术背景:
目前,高速公路中央绿化带基本上都采用人工修剪,或者用手持式绿篱机修剪,以上修剪有以下不足:人工修剪不安全、速度慢,劳动强度大,修剪高度不一致等等。
3.发明内容:
 本设备就是针对目前高速公路中央隔离带人工修剪的不足而改进、设计的一种实用新型高速公路绿篱修剪车。
4.技术方案:
该修剪机由修剪机底盘、修剪装置、调节装置、液压操纵装置、警示装置、电气装置等。
(1)承载车:由一辆1.5吨以上下班货车即可。
(2)修剪装置:由底盘、修剪机立臂、油缸、可调节角度刀具、刀片、修剪马达。
(3)液压操纵装置:通过操纵在驾驶室仪表台上的控制手柄,由多路电磁阀控制液压装置,使本设备能够灵活的升降、
   水平收缩、轻便地完成水平修剪、垂直修剪、高低尺寸修剪等工作步骤。
5.效益对比:
使用了本实用新型设备后,在高速公路中央绿化带实现了机械化、提高了修剪质量、节省了劳动力、提高了工作效率,比人工修剪提##率40倍。本设备是与行驶车辆同向行驶,并且有醒目的导向信号灯、警灯作引导、视野开阔,消除了绿化人员的安全隐患,##了施工安全。
6.操作步骤为:
(1)检查燃油、润滑油、液压油以及油路。
(2)检查各仪表信号、电器部分、机械部分、工作刀具、传动刀具、传动皮带、刀片是否正常。
(3)打开警示装置提醒过往车辆注意安全。
(4)按下启动按钮,并启动液压泵,调整至修剪高度、角度。
(5)按下工作按钮,修剪马达启动,开始工作。
(6)通过反光镜工作情况并进行修剪高度、角度的微调。
(7)结束工作,关闭修剪马达,并将修剪臂缩回原位置,驶离现场,并对设备进行保养。
凯雷重工75/76
karey Heavy Industry
1.The new practical hedge trimmer is a kind of multifunctional trimmer for freeway virescence.
2.The technique background:
At present, the greenbelts in the middle of freeway is generally trimmed by people or the handheld trimmer. The above has some
weaknesses such as the insecurity, inefficiency, intense working and the uneven of the plants after the trimming by manual work.
3.The inventing contents.
This device is a new kind practical hedge trimmer used on the freeway, which is designed to improve the weaknesses of trimming
the greenbelt in the middle of freeway
4.The technical plans
This trimmer is composed by trimmer chassis, trimming devices, adjusting devices, hydraulic pressure operating system,
attention device, electronic devices and so on.
(1)Carrying car: a lorry about 1.5t is available.
(2)Trimming devices: chassis, the arm of the trimmer, hydro-cylinder, the adjustable cutter, blade, and trimming motor
(3)Hydraulic control devices: the device can flexibly lift, fall and contracts on a level to do the work of trimming horizontally,
perpendicularly and trimming according to sizes highly and lowly by operating the control handle on the instrument desk in the cab
and the Multi-channel electromagnetic valve controls the hydraulic devices.
5.Profits comparison
After using the new practical equipments, the trimming of the greenbelt in the middle of freeway is mechanized, the quality
is raised, we reduce a lot of labor forces and enhance the working efficiency, which is 40 times faster than manual work. This
equipment is in the same direction of passing cars and the striking guide lights,alarm lights guides the workers in a wide view, so
that this can eliminate the insecure facts and guarantee the security of working.
6.The operating procedures,
(1)Check up the fuel, lubricating oil hydraulic oil and oil circuit.
(2)Check up whether each instrument signal, the electronic parts, machine parts, working tools, transmission tools, transmission
belt and blades are in good condition.
(3)Turn on the attention device to warn the passing cars to be careful.
(4)Give the starting button a press, start hydraulic pump and adjust it to the hight and angle of trimming.
(5)Give the working button a press, then the trimming motor starts and begins to work.
(6)Fine adjust the hight and angle of trimming by checking the work in the retrore flector.
(7)When the work ends, turn off the trimming motor, put back the trimming arm to the original place, leave the spot and maintain
the equipments.
The introduction of HQM3-1hedge trimmer
绿篱修剪机技术参数The technical parameters of hedge trimmer
发电机功率:8kw
修剪幅宽:1500mm
修剪高度:1500mm—1900mm
修剪作业速度:6-10km/h
修剪电机功率:380V-3kw
液压电机功率:380v-1.5LW
液压系统工作压力:12MPa
电器系统工作电压:12V、380V
整机质量:1350kg
配套车辆:车厢长度大于3.5m

Generator power:8km
Trimming width:1500mm
Trimming height:1500mm—1900mm
Trimming speed:6-10km/h
Trimming generator power: 380V—3kw
Motor power: 380v—1.5LW
Hydraulic system working pressure:12MPa
Electronic equipments system working voltage:12V—380V
The whole machine mass:1350kg
Matched vehicle: the car length is more than 3,5m

   
 
 
  技术支持:兆通科技
本站主要关键词:除雪车,除雪设备,除雪铲,铲雪设备,机场除雪车,皮卡除雪车
哈尔滨凯雷重工科技有限公司·版权所有 地 址:哈尔滨市哈南工业新城核心区南城二路1号
电 话:0451-51876006 邮 编:150060 传 真:0451-51876000 网 址:www.karey.cc 邮 箱:kareyhb@163.com
分享到: